No products in the cart.
PIR Sensor HC-SR501 – PIR Motion Sensor
- Current drain: <60uA
- Voltage Output: High/Low level signal:3.3V TTL output
- Detection distance: 3-7M(can be adjusted)
- Detection range: < 120°
₹68.00₹75.52Incl. of GSTPIR Sensor HC-SR501 – PIR Motion Sensor
₹68.00₹75.52Incl. of GSTA4988 Stepper Motor Driver Module
- Load Supply Voltage (VBB): 8V-35V
- Output Current: ±2A(max)
- Logic Input Voltage: –0.3V to 5.5V
- Logic Supply Voltage: –0.3V to 5.5V
- Operating Ambient Temperature: –20ºC to 85ºC
₹68.00₹84.00Incl. of GSTA4988 Stepper Motor Driver Module
₹68.00₹84.00Incl. of GST0.28 inch 3 Digit Voltmeter – 0 to 100V DC – Red Color
- 3 Digit Voltmeter
- Measuring Range: 0 to 100 VDC
- RED Colour Display
- Input Voltage: 5 VDC
₹68.90₹88.38Incl. of GST0.28 inch 3 Digit Voltmeter – 0 to 100V DC – Red Color
₹68.90₹88.38Incl. of GSTCAT24C512 Eeprom IC – Serial 512 Kb Eeprom – ONSemi – SOIC-8
- 1.8 V to 5.5 V Supply Voltage Range
- Supports Standard, Fast and Fast−Plus I2C Protocol
- 128−Byte Page Write Buffer
- Hardware Write Protection for Entire Memory
- 1,000,000 Program/Erase Cycles
- Package: 8−pin, SOIC
₹68.91 Incl. of GSTCAT24C512 Eeprom IC – Serial 512 Kb Eeprom – ONSemi – SOIC-8
₹68.91 Incl. of GSTMini Adjustable 1.3A DC-DC Buck Converter Module 12V 3V3 9V 5V
- Input: 1.5V + Output
- Input Voltage: 24V (max)
- Output: Adjustable (3.3V , 5V , 9V, 12V )
- output current: 1.3A(max)
- efficiency up to 94%.
₹70.00 Incl. of GSTMini Adjustable 1.3A DC-DC Buck Converter Module 12V 3V3 9V 5V
₹70.00 Incl. of GSTW25Q128JVSSIQ Serial Flash – 128Mbit – SOIC-8
- Winbond 128MBits (16MB) Serial Flash
- Supports Standard SPI, Dual And Quad SPI
- Supply Voltage: 2.7V to 3.6V
- Current Consumption: 1uA (power-down)
- Continuous Data Transfer Rate: 66 MB/s
- 100K cycle of Program Erase Cycle, and 20 year data retention
₹70.00₹117.00Incl. of GSTW25Q128JVSSIQ Serial Flash – 128Mbit – SOIC-8
₹70.00₹117.00Incl. of GSTTXS0104EDR 4-Bit Bidirectional Voltage-Level Translator SOIC-14
- VCCA Supply voltage: 3.6V(max)
- VCCB Supply voltage: 5.5V(max)
- Δt/Δv Input transition rise or fall rate: 10ns/V
- Port A output high voltage: VCCA × 0.8V
- Port A output low voltage: 0.4V
- Port B output high voltage: VCCB × 0.8V
- Port B output low voltage: 0.4V
₹70.00 Incl. of GSTTXS0104EDR 4-Bit Bidirectional Voltage-Level Translator SOIC-14
₹70.00 Incl. of GST3S 20A Lithium Ion BMS – For 12.6V Battery
- Self consuming current 24 uA
- Overcharge protection voltage 4.3v(max)
- Over dis-charge protection voltage 2.6(max)
- Over current protection current 60A(max)
- Environment temperature -40°c to 85°c
- Continue work power 252W (max)
₹72.00 Incl. of GST3S 20A Lithium Ion BMS – For 12.6V Battery
₹72.00 Incl. of GSTMP1495 Multi Output Step Down Module – 3A
- Wide 4.5V-to-16V Operating Input Range
- Output Voltage VOUT: 0.8V to VIN-3V
- Multiple Output Options : 1.25V, 1.5V, 1.8V, 2.5V, 3.3V, 5V
- Operating Junction Temp. (TJ). -40°C to +125°C
- Fixed 500kHz Switching Frequency
₹72.00 Incl. of GSTMP1495 Multi Output Step Down Module – 3A
₹72.00 Incl. of GSTMQ7 Gas Sensor – Carbon Monoxide (CO)
- Circuit Voltage: 5V
- Heating Resistance: 33Ω ± 5%
- Heating consumption: About 350mW
- Relative humidity: Less than 95%RH
- Detecting range: 20ppm-2000ppm carbon monoxide
₹74.80 Incl. of GSTMQ7 Gas Sensor – Carbon Monoxide (CO)
₹74.80 Incl. of GSTHLW8012 Energy Meter IC – SOP-8
- Supply Voltage: 5V
- current consumption: 3mA
- Reference voltage: 2.43V
- Working temperature: -40°C to 85°C
- Input leakage current: ±10 µA
- built-in oscillator: 3.579MHz
- Package: SOP-8
₹75.00 Incl. of GSTHLW8012 Energy Meter IC – SOP-8
₹75.00 Incl. of GST3S 10A Lithium Ion BMS Module – For 11.1V Battery
- Overcharge detection voltage range: 4.25-4.35V±0.05V
- Over discharge detection voltage: 2.3-3.0V±0.05V
- Charging voltage: 12.6V-13V
- Maximum discharge current: 10A
- Quiescent current: <30µA
- Working temperature: -40℃ to + 50℃
₹75.25₹110.55Incl. of GST3S 10A Lithium Ion BMS Module – For 11.1V Battery
₹75.25₹110.55Incl. of GST