No products in the cart.
Inductor 100uH – 5.2×5.8×4.5mm – CD54 – SMD
- Inductance: 100 µH ± 10%
- Rated Current: 0.70A
- Temperature storage range: -10℃~70℃
- relative humidity:RH65%~85%
- DC Resistance(Ω)Max: 0.55
- L×W×H: 5.2×5.8×4.5mm ± 0.5mm
- Part No.: JCD54-101K
₹9.50 Incl. of GSTInductor 100uH – 5.2×5.8×4.5mm – CD54 – SMD
₹9.50 Incl. of GSTRocker Switch DPDT – 6A
- Dual Pole Dual Throw Rocker Switch
- Current Capacity: 6 A @ 250V AC/DC
- High Quality, Reliable
- Easy to mount, using flash mount points
₹21.24 Incl. of GSTRocker Switch DPDT – 6A
₹21.24 Incl. of GSTHeat Shrink Sleeve 2mm – Green
- Colour: Green
- Diameter: 2 mm
- Length: 1 Meter
- Shrink Ratio: 2:1
- Material: Polyolefin
- Shrink Temperature: 90° C
- Make: WOER
₹5.00 Incl. of GSTHeat Shrink Sleeve 2mm – Green
₹5.00 Incl. of GST1uH 6mm Inductor – SMD – CD54
- Inductance tested at 100KHz,0.1V
- SRF>13MHz measured using Agilent / HP8753D network Analyzer
- Inductance drop = 10% typ.at rated Isat
- △T=40℃ rise typ. at Irms
- Operating temperature range-40℃ to +125℃
- Electrical specifitions at +25℃
₹8.26 Incl. of GST1uH 6mm Inductor – SMD – CD54
₹8.26 Incl. of GSTM3 x 25 MS Bolt – CSK Philips Head
- Diameter (D): 3mm (M3)
- Length (L): 25mm
- Thread Pitch: 0.5mm
- Head Diameter (HD): Approx. 5.6mm
- Head Height (HH): Approx. 1.65mm
- Material: Mild Steel (MS)
₹0.85 Incl. of GSTM3 x 25 MS Bolt – CSK Philips Head
₹0.85 Incl. of GST100nf 450V Polyester Capacitor -10mm – Kwortran
- Capacitance: 100nF (nanofarads)
- Voltage Rating: 450V
- Dielectric Material: Polyester
- Housing: Square
- Lead Pitch: 10mm
- Mounting Type: Through-hole
- Manufacturer: Kwotran
₹4.00 Incl. of GST100nf 450V Polyester Capacitor -10mm – Kwortran
₹4.00 Incl. of GST0.96 Inch OLED Display – I2C/IIC – Yellow + Blue Colour
- Resolution: 128 x 64
- Display Color: Yellow + Blue
- Input Voltage: 3.3V ~ 5V
- Only Need 2 I/O Port to Control
- Interface: I2C
₹169.00₹243.00Incl. of GST0.96 Inch OLED Display – I2C/IIC – Yellow + Blue Colour
₹169.00₹243.00Incl. of GSTM3 X 15mm Bolt – CSK – MS
- Type: M3 (3.0mm Diameter)
- Material: Mild Steel
- Bolt Length: 15mm
- Bolt Head Style: Slotted Round
- Counter Sunk
₹0.60 Incl. of GSTM3 X 15mm Bolt – CSK – MS
₹0.60 Incl. of GSTInductor 10uH – 5.2×5.8×4.5mm – CD54 – SMD
- Inductance: 10 µH ± 10%
- Rated Current: 1.65A
- Temperature storage range: -10℃~70℃
- relative humidity:RH65%~85%
- DC Resistance(Ω)Max: 0.10
- L×W×H: 5.2×5.8×4.5mm ± 0.5mm
- Part No.: JCD54-100K
₹9.50 Incl. of GSTInductor 10uH – 5.2×5.8×4.5mm – CD54 – SMD
₹9.50 Incl. of GSTRP2040 MCU – Raspberry Pi – QFN-56
- Dual ARM Cortex-M0+ @ 133MHz
- Input supply Voltage: 3.7V(max)
- Package: QFN-56
- 264kB on-chip SRAM in six independent banks
- Support for up to 16MB of off-chip Flash memory via dedicated QSPI bus
₹65.00₹67.50Incl. of GSTRP2040 MCU – Raspberry Pi – QFN-56
₹65.00₹67.50Incl. of GSTInductor 2.2uH – 10x10x4mm – CDRH104R – SMD
- Inductance: 2.2 µH ± 30%
- Rated Current: 7.5A
- Temperature storage range: -25℃~80℃
- relative humidity:RH65%~85%
- DC Resistance(Ω)Max: 0.01
- L×W×H: 10×10×4 mm ± 0.5mm
- Part No.: JCDRR104-2R2N
₹13.45 Incl. of GSTInductor 2.2uH – 10x10x4mm – CDRH104R – SMD
₹13.45 Incl. of GST9 Pin 2510 Series Female Connector
- Supports up to 22AWG Wires to be crimped in 2510 Series Terminal
- Can carry up to 3A Peak Current
- Max Voltage: 250V AC/DC
- Withstand Voltage: 1000V AC/min
- Temperature Range: -40 to 85 Degree C
- To be Bought with 2510 Series Crimp Terminal
₹1.59 Incl. of GST9 Pin 2510 Series Female Connector
₹1.59 Incl. of GST