No products in the cart.
CC1101 RF Transceiver Module – 868Mhz
- Support FSK, GFSK, ASK / OOK and MSK
- Programmable data rate: 1.2 to 500k Baud
- Vertical Pin header (1.27mm pitch)
- Low voltage input (1.9~3.6V)
- SPI interface
- Independent 64-byte RX and TX data FIFOsCC1101 Core, 433MHz Wireless function
₹265.00 Incl. of GSTCC1101 RF Transceiver Module – 868Mhz
₹265.00 Incl. of GSTYX850 Power Failure Automatic Switching Module – 5V-48V
- Input Voltage Range: 5V to 48V DC
- Switching Current: Up to 10A
- Power Consumption: Low power consumption during operation
- Primary-Secondary Switching Delay: < 10ms
- Operating Temperature Range: -40°C to 85°C
- Mounting: Screw hole mounting for easy installation
₹249.00 Incl. of GSTYX850 Power Failure Automatic Switching Module – 5V-48V
₹249.00 Incl. of GSTPN532 NFC RFID Read Write Module Kit V3
- Operating Voltage: 3.3V – 24V (TTL level for I2C/UART), 3.3V (TTL for SPI)
- Interface: I2C, SPI, High-Speed UART (HSU)
- Communication Distance: 5cm to 7cm (NFC and RFID)
- PCB Antenna: Built-in, providing 4cm to 6cm communication range
- Works as an NFC device or RFID reader/writer
₹268.00 Incl. of GSTPN532 NFC RFID Read Write Module Kit V3
₹268.00 Incl. of GSTAMS1117 3.3V Power Supply Module
- Model: AMS1117 3.3V Voltage Regulator Module
- Input Voltage Range: 4.5V – 12V DC
- Output Voltage: 3.3V DC
- Output Current: Up to 800mA
- Dropout Voltage: 1.1V @ 800mA load
- Operating Temperature: -40°C to 125°C
₹13.00 Incl. of GSTAMS1117 3.3V Power Supply Module
₹13.00 Incl. of GSTGP2Y0A02YK0F Sharp Distance Measuring Sensor – 20 to 150 cm Range
- Distance Measuring Range: 20 to 150 cm
- Output Type: Analog
- Consumption Current: Typical 33 mA
- Supply Voltage: 4.5 to 5.5 V
- Operating Temperature (Topr): -10 to +60 ℃
₹440.00 Incl. of GSTGP2Y0A02YK0F Sharp Distance Measuring Sensor – 20 to 150 cm Range
₹440.00 Incl. of GSTAHT21B Temperature And Humidity Sensor Module V1.0
- Temperature Range: -40°C to 80°C
- Temperature Accuracy: ±0.5°C
- Humidity Range: 0% to 100% RH
- Humidity Accuracy: ±3% RH
- Interface: I2C
- Supply Voltage: 2.2V to 5.5V
- Response Time: < 8 seconds (humidity), < 1 second (temperature)
₹102.00 Incl. of GSTAHT21B Temperature And Humidity Sensor Module V1.0
₹102.00 Incl. of GSTAHT25 Temperature and Humidity Sensor Module
- Temperature Range: -40°C to +85°C
- Humidity Range: 0% to 100% RH
- Accuracy: ±0.3°C (Temperature), ±2% RH (Humidity)
- Power Supply: 2.2V to 5.5V
- Interface: I2C
₹121.00 Incl. of GSTAHT25 Temperature and Humidity Sensor Module
₹121.00 Incl. of GST2.8 Inch TFT LCD Non-Touch Screen Module 240×320 Resolution – SPI Interface
- Display Size: 2.8 inches with a 240×320 pixel resolution.
- Driver IC: ILI9341
- Color Depth: 262K/65K
- Interface: SPI communication interface.
- Input Voltage (V): 3.3 to 5
- Display Type: TFT Non-Touch
- SD Card Support
₹509.00 Incl. of GST2.8 Inch TFT LCD Non-Touch Screen Module 240×320 Resolution – SPI Interface
₹509.00 Incl. of GST2.8 Inch TFT LCD Touch Screen Module – 240×320 Resolution – SPI Interface – with Touch
- Display Size: 2.8 inches with a 240×320 pixel resolution.
- Driver IC: ILI9341
- Color Depth: 262K/65K
- Touch Technology: 4-wire resistive touch screen.
- Interface: SPI communication interface.
- Input Voltage (V): 3.3 to 5
₹769.00 Incl. of GSTOLED Display 1.3 inch Blue SPI – 128×64 – 7 pin
- Driver Chip: SH1106
- Interface: SPI
- Resolution: 128×64 pixels
- Display Size: 1.3 inch
- Display Color: Blue
- Pin Count: 7 pins
- Viewing Angle: Greater than 160°
- Operating Temperature: -40℃ to 80℃
- Operating Voltage: 3.3V / 5V
₹310.90 Incl. of GSTOLED Display 1.3 inch Blue SPI – 128×64 – 7 pin
₹310.90 Incl. of GST1.3 Inch OLED Display – I2C – IIC – 128×64 – Blue Colour
- Chip: SH1106
- Interface: I2C
- Power Supply: 3.3V-5V
- Display: Graphic LCD, 1.3” in width, with a resolution of 128×64 dots
- Display Colors: BLUE
- Current Consumption: 8 mA when fully operational
₹320.00 Incl. of GST1.3 Inch OLED Display – I2C – IIC – 128×64 – Blue Colour
₹320.00 Incl. of GSTSTM32F072CBT6 MCU IC – ST – Arm Cortex M0 – LQFP-48
- Core: Arm® Cortex®-M0, 48 MHz
- Memory: 128 KB Flash, 16 KB SRAM
- Operating Voltage: 2.0V to 3.6V
- USB 2.0 full-speed, crystal-less with internal 48 MHz oscillator
- Timers: 12 timers including PWM, watchdog, and SysTick
- Analog: 12-bit ADC (16 channels), 12-bit DAC (2 channels)
- 2 analog comparators
- Interfaces: 2 I2C, 4 USART, 2 SPI, CAN
- I/Os: Up to 87 fast I/Os, 68 with 5V tolerance
₹190.00 Incl. of GSTSTM32F072CBT6 MCU IC – ST – Arm Cortex M0 – LQFP-48
₹190.00 Incl. of GST