TB6612FNG Motor Driver Module
- Power supply voltage: VM=15V (Max.)
- Output current: Iout=1.2A (ave) / 3.2A (peak)
- Output low ON resistor: 0.5Ω (upper + lower Typ. @ VM ≥ 5V)
- Standby (Power save) system
- CW/CCW/short brake/stop function modes
- Built-in thermal shutdown circuit and low voltage detecting circuit
- Response to Pb-free packaging
₹194.00 Incl. of GSTTB6612FNG Motor Driver Module
₹194.00 Incl. of GSTAPDS9960 RGB And Gesture Sensor
- Ambient Light & RGB Color Sensing
- Proximity Sensing
- Gesture Detection
- Operating Range: 4-8inches (10-20cm)
₹188.00₹211.80Incl. of GSTAPDS9960 RGB And Gesture Sensor
₹188.00₹211.80Incl. of GSTSTM32F103C8T6 Module – ST Development Board
- STM32F103C8T6 Original MCU From ST
- Arm 32Bit Core M3 based Core
- 8Mhz OnBoard Crystal
- Working Voltage: 2.0 to 3.6V
- Almost all I/O are 5V tolerant
- Upto 37 I/Os
- USB 2.0 Full Speed
₹185.50 Incl. of GSTSTM32F103C8T6 Module – ST Development Board
₹185.50 Incl. of GSTSTM32F103C8T6 Compatible Module
- STM32F103C8T6 Compatible MCU from CKS
- ARM 32Bit Cortex M3 CPU Core
- 64K Flash
- 20K RAM
- 2.0V to 3.6V Application Supply and I/Os
- 37 I/Os, 2 SPI, 3 USART, 1 CAN
- 4 Timer, 2 A/D Converters
₹185.50₹411.82Incl. of GSTSTM32F103C8T6 Compatible Module
₹185.50₹411.82Incl. of GSTESP8285 M2 Wifi Module
- Ultra-small size
- Support serial to Wi-Fi
- Wireless transparent transmission
- Long distance transmission with ultra-low power
- Support outboard antenna
- Provides Security for the firmware
₹185.00 Incl. of GSTESP8285 M2 Wifi Module
₹185.00 Incl. of GSTUSB to Rs485 Converter Module
- Industrial Grade RS485 to USB Converter Module
- Automatic Data Flow Control
- Baud rate: 300 – 9216000bps with auto detect
- Supports Multipoint communication, upto 32 RS485 Interace devices
- Interface Protection: TVS Diode, USB Self Recovery Protection
₹185.00₹215.00Incl. of GSTUSB to Rs485 Converter Module
₹185.00₹215.00Incl. of GSTArduino Nano R3 CH340G Compatible Board
- Arduino Nano Compatible Board
- Operating Voltage: 5V
- Input Voltage: 7V to 12V
- Peripherals: 1 x USART, 1 x SPI, 1 x I2C
- Digital I/O pins: 22 (out of which 6 can be used for PWM output)
- Analog Input Pins: 6
₹185.00₹315.00Incl. of GSTArduino Nano R3 CH340G Compatible Board
₹185.00₹315.00Incl. of GSTWemos D1 Mini Wifi ESP8266 Development Board Arduino Compatible
- Minimalist ESP8266 Based Wifi Development Board
- Microcontroller: ESP8226EX ( of ESP8266-12F )
- Flash Size: 4MB
- Supports upto 12V Input
- 11 Digital + 1 Analog I/O
- Supports UART/SPI/I2C
₹182.50₹232.22Incl. of GSTWemos D1 Mini Wifi ESP8266 Development Board Arduino Compatible
₹182.50₹232.22Incl. of GST12V 2A DC Power Supply Adapter
- Input voltage: 100-240V AC, 50/60Hz
- Output voltage: 12V DC
- Maximum output current: 2A
- Power rating: 24W
- Connector type: DC female plug
- Overload protection
- Short circuit protection
- High Quality Adapter with BIS Certificate
- Over voltage protection
₹181.00 Incl. of GST12V 2A DC Power Supply Adapter
₹181.00 Incl. of GSTMP4560 DC DC 8-55V to 5V 2A Step Down Module – Fixed Output
- Input Voltage (VIN): 8V to 55V
- Output Voltage (VOUT): 5V
- Output Current (IOUT): Up to 2A
- Efficiency: Up to 95%
- Quiescent Current: 140μA (typical)
- Switching Frequency: Up to 2MHz
₹180.00 Incl. of GSTMP4560 DC DC 8-55V to 5V 2A Step Down Module – Fixed Output
₹180.00 Incl. of GST5S 25A Lithium Ion BMS module – For 21V Li-ion Battery
- Charge voltage: 21V
- Charging current: 15A(max)
- Continuous Discharge Current: 15A(max)
- Instantaneous discharge current: 25A
- Self-consumption Working current: ≤30uA
- Working Temperature Range: -30 to +80
₹178.18 Incl. of GST5S 25A Lithium Ion BMS module – For 21V Li-ion Battery
₹178.18 Incl. of GSTADS1115 ADC Module – 16Bit – I2C- 4 Channel ADC
- 4 Channel, 16 Bit Analog to Digital Converter Module
- Interface: I2C
- Operating Voltage: 2.0 V to 5.5 V
- Programmable Data Rate: 8 SPS to 860 SPS
₹169.00 Incl. of GSTADS1115 ADC Module – 16Bit – I2C- 4 Channel ADC
₹169.00 Incl. of GST