RC522 RFID Reader / Writer 13.56 Mhz Module Kit
- MFRC522 Based RFID Card Reader / Writer Kit
- Frequency: 13.56 Mhz
- Card Reading / Writing Distance: >= 50 mm
- Operating Voltage: 3.3V
₹80.00₹115.52Incl. of GSTRC522 RFID Reader / Writer 13.56 Mhz Module Kit
₹80.00₹115.52Incl. of GST3S 20A Lithium Ion BMS – For 12.6V Battery
- Self consuming current 24 uA
- Overcharge protection voltage 4.3v(max)
- Over dis-charge protection voltage 2.6(max)
- Over current protection current 60A(max)
- Environment temperature -40°c to 85°c
- Continue work power 252W (max)
₹72.00 Incl. of GST3S 20A Lithium Ion BMS – For 12.6V Battery
₹72.00 Incl. of GST3S 10A Lithium Ion BMS Module – For 11.1V Battery
- Overcharge detection voltage range: 4.25-4.35V±0.05V
- Over discharge detection voltage: 2.3-3.0V±0.05V
- Charging voltage: 12.6V-13V
- Maximum discharge current: 10A
- Quiescent current: <30µA
- Working temperature: -40℃ to + 50℃
₹75.25₹110.55Incl. of GST3S 10A Lithium Ion BMS Module – For 11.1V Battery
₹75.25₹110.55Incl. of GST1.5A Multi-function Mini Boost step up module
- Input Voltage: 2.5V~VOUT-0.5V
- Output Voltage: 5V/8V/9V/12V, default is 12V
- Output current: 1A(max)
- The LED indicator can be turned off by the pad next to it
- Low power consumption
₹25.95 Incl. of GST1.5A Multi-function Mini Boost step up module
₹25.95 Incl. of GSTXL6009 Step Up Down Buck Boost Converter Module
- Automatic Buck Boost Converter Module
- Wide Input Voltage Range: 3.8V to 32V
- Wide Output Voltage Range: 1.25V to 35V
- Max Output Current: 4A
- Useful in Solar Based Applications
₹163.90 Incl. of GSTXL6009 Step Up Down Buck Boost Converter Module
₹163.90 Incl. of GSTESP8266 ESP-01 WiFi Module
- Integrated WiFi SoC Module
- 2 GPIOs
- Operating Voltage: 3.3V
- 1MB Flash Memory
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
₹98.00₹115.65Incl. of GSTESP8266 ESP-01 WiFi Module
₹98.00₹115.65Incl. of GSTArduino Nano R3 CH340G Compatible Board
- Arduino Nano Compatible Board
- Operating Voltage: 5V
- Input Voltage: 7V to 12V
- Peripherals: 1 x USART, 1 x SPI, 1 x I2C
- Digital I/O pins: 22 (out of which 6 can be used for PWM output)
- Analog Input Pins: 6
₹185.00₹315.00Incl. of GSTArduino Nano R3 CH340G Compatible Board
₹185.00₹315.00Incl. of GSTRS232 To TTL Converter Module
- RS232 to TTL Converter based on MAX3232CSE ( can operate at lower voltage)
- Voltage Range: 3V to 5V
- Maximum Baud Rate: 115 Kbps
- Full Duplex Operation
₹23.00₹34.10Incl. of GSTRS232 To TTL Converter Module
₹23.00₹34.10Incl. of GSTDS18B20 Temperature Sensor – Waterproof – 1 Meter Length
- Usable temperature range: -55 to 125°C (-67°F to +257°F)
- 9 to 12 bit selectable resolution
- Uses 1-Wire interface- requires only one digital pin for communication
- ±0.5°C Accuracy from -10°C to +85°C
- Usable with 3.0V to 5.5V power/data
- Length: 1M
₹66.00₹84.37Incl. of GSTDS18B20 Temperature Sensor – Waterproof – 1 Meter Length
₹66.00₹84.37Incl. of GSTSolenoid Valve
- Solenoid Valve
- Operating Voltage: 12V / 24V DC
- Operating Current: 400 mA
- Normally Closed Valve
- Push to Fit Connectors on both end
₹118.00₹177.00Incl. of GSTSolenoid Valve
₹118.00₹177.00Incl. of GSTUBlox NEO 6M GPS Module with EEPROM
- Position can be updated every 12 seconds
- Cold start time of 38 s and Hot Start Time of 1 s
- Baud Rate: 4800 to 115200 (Default: 9600)
- SuperSense Indoor GPS: -162 dBm tracking sensitivity
- Supports SBAS (WAAS, EGNOS, MSAS, GAGAN)
- Comes with GPS Antenna (18 x 18 mm)
₹235.00₹292.05Incl. of GSTUBlox NEO 6M GPS Module with EEPROM
₹235.00₹292.05Incl. of GSTBluetooth Module HC-05 with TTL Output
- Bluetooth protocol: Bluetooth Specification v2.0+EDR
- Frequency: 2.4 GHz ISM band
- UART interface with programmable baud rate
- Integrated antenna
- Can operate in Master or Slave mode
- Auto connect to last device on power as default
₹231.28 Incl. of GSTBluetooth Module HC-05 with TTL Output
₹231.28 Incl. of GST