ESP32-WROOM-32 WiFi + BT + BLE Module
- Wifi Protocols: 802.11 b/g/n
- Wi-Fi+BT+BLE MCU Module
- On Chip Hall Sensor
- Integrated Crystal of 40 Mhz
- Integrated SPI Flash of 4 MB
- Recommended Voltage: 3.3V
- Operating Current: Average 80 mA
₹223.50 Incl. of GSTESP32-WROOM-32 WiFi + BT + BLE Module
₹223.50 Incl. of GSTESP32 Development Board WiFi + BT + BLE
- ESP32-WROOM-32 Based Development board
- It supports WiFi, Bluetooth, Bluetooth Low Energy
- Dual Core MCU
- Clock Frequency of upto 240 Mhz
- Upto 512 KB RAM
- Available Peripherals: Capactive Touch, ADCs, DACs, UART, SPI, I2C and more
₹335.00₹438.96Incl. of GSTESP32 Development Board WiFi + BT + BLE
₹335.00₹438.96Incl. of GSTDS3231 RTC Module
- DS3231 Based Real Time Clock Module
- Interface: I2C
- Onboard CR2032 Battery Holder
- Operating Voltage: 2.3V to 5.5V
- Active Supply Current: 200 ~ 300 µA
- Standby Current: 110 ~ 170 µA
- Active Battery Current: 70 ~ 150 µA
₹106.00 Incl. of GSTDS3231 RTC Module
₹106.00 Incl. of GST4 Channel Capacitive Touch Module
- 4 Channel Capacitive Touch Keypad
- Operating Voltage: 2.4 ~ 5.5V
- Operating Current: < 9 µA
- Fast Mode and Low Power Mode
- Various Output Mode selection
- Outputs sensing via dedicated output pins
₹66.00 Incl. of GST4 Channel Capacitive Touch Module
₹66.00 Incl. of GSTTTP229 16 Channel Capacitive Touch Sensor Keypad Module
- 16 Channel Touch Keypad
- Operating Voltage: 2.4 to 5.5V
- Operating Current: 20 µA
- I2C Interface for communication with MCU
- 8 OUT pins for output driving
₹115.75 Incl. of GSTTTP229 16 Channel Capacitive Touch Sensor Keypad Module
₹115.75 Incl. of GSTBluetooth Module HC-05 with TTL Output
- Bluetooth protocol: Bluetooth Specification v2.0+EDR
- Frequency: 2.4 GHz ISM band
- UART interface with programmable baud rate
- Integrated antenna
- Can operate in Master or Slave mode
- Auto connect to last device on power as default
₹231.28 Incl. of GSTBluetooth Module HC-05 with TTL Output
₹231.28 Incl. of GST3 Phase CT Coil Module – 100A
- 3 Phase CT Coil Module
- Analog Output
- Current to Voltage Ratio: 10:1 (1V for 10 A)
- Max Current Detection: 100 A
- Min Current Detection: 6 A
₹472.00 Incl. of GST3 Phase CT Coil Module – 100A
₹472.00 Incl. of GSTArduino Uno R3 – SMD MCU – Without Cable
- Arduino Uno R3 SMD version
- Based on Atmel AVR Atmega328-AU MCU
- Clock: 16 Mhz
- Flash: 32 KB
- SRAM: 2 KB
- EEPROM: 1 KB
₹381.20₹399.00Incl. of GSTArduino Uno R3 – SMD MCU – Without Cable
₹381.20₹399.00Incl. of GSTArduino Uno R3 Compatible Board With Cable – DIP Version
- Arduino Uno DIP Version Compatible Module
- 32 KB Flash
- 2 KB SRAM
- 1 KB EEPROM
- Frequency: 16 Mhz
₹590.00 Incl. of GSTArduino Uno R3 Compatible Board With Cable – DIP Version
₹590.00 Incl. of GSTArduino Nano R3 CH340G Compatible Board
- Arduino Nano Compatible Board
- Operating Voltage: 5V
- Input Voltage: 7V to 12V
- Peripherals: 1 x USART, 1 x SPI, 1 x I2C
- Digital I/O pins: 22 (out of which 6 can be used for PWM output)
- Analog Input Pins: 6
₹185.00₹315.00Incl. of GSTArduino Nano R3 CH340G Compatible Board
₹185.00₹315.00Incl. of GST4S 14.8V 10A Lithium Ion BMS Module
- 4S 10A Lithium Ion BMS
- Max Charge Current: 10A
- Max Discharge Current: 6A
- Over charge voltage: 4.25 to 4.35V Per cell
- Overcharge, Over Discharge, Short Circuit Protection
₹139.00₹250.00Incl. of GST4S 14.8V 10A Lithium Ion BMS Module
₹139.00₹250.00Incl. of GST2S 7.4V 3A Lithium Ion Battery Charging And Protection BMS Module
- 2S 3A BMS
- Charging Voltage: 8.4V to 9V
- Charging Current: 3A
- Discharge Current: 2A
- Overcharge, Over discharge, over current protection
₹37.80₹70.80Incl. of GST2S 7.4V 3A Lithium Ion Battery Charging And Protection BMS Module
₹37.80₹70.80Incl. of GST
Get Lightning Fast dispatch on all orders without any extra charge. And avail GST credit on all your purchases.