No products in the cart.
Mini Adjustable 1.3A DC-DC Buck Converter Module 12V 3V3 9V 5V
- Input: 1.5V + Output
- Input Voltage: 24V (max)
- Output: Adjustable (3.3V , 5V , 9V, 12V )
- output current: 1.3A(max)
- efficiency up to 94%.
₹70.00 Incl. of GSTMini Adjustable 1.3A DC-DC Buck Converter Module 12V 3V3 9V 5V
₹70.00 Incl. of GST0.28 inch 3 Digit Voltmeter – 0 to 100V DC – Red Color
- 3 Digit Voltmeter
- Measuring Range: 0 to 100 VDC
- RED Colour Display
- Input Voltage: 5 VDC
₹68.90₹88.38Incl. of GST0.28 inch 3 Digit Voltmeter – 0 to 100V DC – Red Color
₹68.90₹88.38Incl. of GSTA4988 Stepper Motor Driver Module
- Load Supply Voltage (VBB): 8V-35V
- Output Current: ±2A(max)
- Logic Input Voltage: –0.3V to 5.5V
- Logic Supply Voltage: –0.3V to 5.5V
- Operating Ambient Temperature: –20ºC to 85ºC
₹68.00₹84.00Incl. of GSTA4988 Stepper Motor Driver Module
₹68.00₹84.00Incl. of GSTPIR Sensor HC-SR501 – PIR Motion Sensor
- Current drain: <60uA
- Voltage Output: High/Low level signal:3.3V TTL output
- Detection distance: 3-7M(can be adjusted)
- Detection range: < 120°
₹68.00₹75.52Incl. of GSTPIR Sensor HC-SR501 – PIR Motion Sensor
₹68.00₹75.52Incl. of GSTDS18B20 Temperature Sensor – Waterproof – 1 Meter Length
- Usable temperature range: -55 to 125°C (-67°F to +257°F)
- 9 to 12 bit selectable resolution
- Uses 1-Wire interface- requires only one digital pin for communication
- ±0.5°C Accuracy from -10°C to +85°C
- Usable with 3.0V to 5.5V power/data
- Length: 1M
₹66.00₹84.37Incl. of GSTDS18B20 Temperature Sensor – Waterproof – 1 Meter Length
₹66.00₹84.37Incl. of GST4 Channel Capacitive Touch Module
- 4 Channel Capacitive Touch Keypad
- Operating Voltage: 2.4 ~ 5.5V
- Operating Current: < 9 µA
- Fast Mode and Low Power Mode
- Various Output Mode selection
- Outputs sensing via dedicated output pins
₹66.00 Incl. of GST4 Channel Capacitive Touch Module
₹66.00 Incl. of GSTNRF24L01+ 2.4Ghz Wireless Transceiver Module
- Worldwide 2.4Ghz ISM Band Operation
- Common RX, TX Interface
- 126 RF Channels
- SPI Interface, easy to use with any MCU
- Very low power consumption
- Supply Voltage: 3.3V
₹64.90₹87.00Incl. of GSTNRF24L01+ 2.4Ghz Wireless Transceiver Module
₹64.90₹87.00Incl. of GSTCH340G USB To TTL Converter Module
- Built-in USB to TTL Transfer chip(CH340G).
- Designed to be used for USB to TTL electronic projects.
- TTL interface output, easy to connect to your MCU.
- Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device.
- The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC
- Supports WIN/VISTA/MAC/LINUX(32 bit /64-bit system)
₹64.80 Incl. of GSTCH340G USB To TTL Converter Module
₹64.80 Incl. of GSTXL6009 Step Up Module – DC to Dc Boost Module
- Non Isolated DC DC Boost Chip
- Wide Input Voltage Range: 3V to 32V DC
- Wide Output Voltage Range: 5V to 35V DC
- Output Current: Max 3A
- Switching Frequency: 400Khz
₹62.00₹73.70Incl. of GSTXL6009 Step Up Module – DC to Dc Boost Module
₹62.00₹73.70Incl. of GSTLM2596HVS Step Down Module
- Input voltage : 4.5-50 Volts
- Output voltage : 3 – 35 Volts
- Short circuit protection : current limiting, thermal protection, self-recovery.
- Conversion efficiency : up to 92%
- Output current : rated current 3A(max)
- Max Power : 15W
₹60.00 Incl. of GSTLM2596HVS Step Down Module
₹60.00 Incl. of GSTHC SR04 Ultrasonic Sensor
- Ultra Sonic Sensor
- Operating Voltage: 5 VDC
- Measuring Range: 2 to 500 cm
- Resolution: 0.3 cm
₹58.90₹73.16Incl. of GSTHC SR04 Ultrasonic Sensor
₹58.90₹73.16Incl. of GSTI2C Serial To Parallel Converter Module
- 5V power supply.
- Serial I2C control of LCD display using PCF8574.
- Backlight can be enabled or disabled via a jumper on the board.
- Contrast control via a potentiometer.
- Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing.
₹55.00₹90.00Incl. of GSTI2C Serial To Parallel Converter Module
₹55.00₹90.00Incl. of GST