No products in the cart.
MAX7219 Dot Led Matrix Module – 8×8 MCU Control
- Driver Chip: MAX7219
- Input Voltage: 4-5.5V
- Input Current 330mA
- Requires only 3 communication wires of MCU
- A single module can drive an 8 * 8 common cathode LED
₹128.00 Incl. of GSTMAX7219 Dot Led Matrix Module – 8×8 MCU Control
₹128.00 Incl. of GSTLASER Diode Module – 5V DC – 650nM
- Voltage: 3.0 V – 5 V
- Transmit power: 58mW
- Input current: 30mA
- Wavelength: 650nM
- Operating temperature: -36°C ~ 65°C
₹32.00 Incl. of GSTLASER Diode Module – 5V DC – 650nM
₹32.00 Incl. of GSTLM386 Mono Audio Amplifier Module
- Onboard LM386 Chip
- On-board 10K variable resistor, you can adjust the volume of the enlarged
- Onboard power indicator
- The chip pin leads, can be directly input audio signal
- Wide supply voltage range: 4V–12V or 5V–18V
- Low quiescent current drain: 4mA
₹39.00₹50.74Incl. of GSTLM386 Mono Audio Amplifier Module
₹39.00₹50.74Incl. of GSTHX711 Precision Weight Sensor Module – Load Cell Amplifier
- Full scale differential input range: ±0.5(AVDD/GAIN)V
- Data accuracy: 24 bit (24 bit A / D converter chip.)
- Refresh frequency: 10/80 Hz
- Operating Voltage: 2.7V to 5VDC
- Operating current: <10 mAHX
₹45.00 Incl. of GSTHX711 Precision Weight Sensor Module – Load Cell Amplifier
₹45.00 Incl. of GST24V 15A SMPS – 360W – With Fan
- AC Input Voltage: 110V/220V ± 15%
- DC output voltage: 24V
- Output Current: 15A Max
- Output power: 360W
- Built-in DC fan
₹1,288.00 Incl. of GST24V 15A SMPS – 360W – With Fan
₹1,288.00 Incl. of GSTESP32 CAM Development Board – With OV2640 2 MP Camera
- Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
- Low-power dual-core 32-bit CPU for application processors
- Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
- Support OV2640 and OV7670 cameras with built-in flash
- Support TF card
₹476.00 Incl. of GSTESP32 CAM Development Board – With OV2640 2 MP Camera
₹476.00 Incl. of GST4×4 Matrix Membrane Keypad Module
- Ultra-thin design & adhesive backing provides easy integration to any project
- Excellent price-performance ratio
- Easy communication with any microcontroller.
- 5 pins 2.54mm pitch connector, 4x 4type 16 keys.
- Sticker can peel off for adhesive mounting.
₹40.00₹72.99Incl. of GST4×4 Matrix Membrane Keypad Module
₹40.00₹72.99Incl. of GSTWEMOS ESP32 Development Board – With Battery Holder
- Ultra-low power consumption
- 32 GPIO: ADC(16), SPI(2), I2C(1), UART(1), PWM(32), SDIO(50 Mhz)
- 520 KB SRAM
- 4 MB Flash
- 802.11BGN HT40 WiFi Transceiver (-98 dBm minimum sensitivity)
- Max data rate: 150 Mbps
- -40°C to 125°C operating temperature
₹780.00₹974.00Incl. of GSTWEMOS ESP32 Development Board – With Battery Holder
₹780.00₹974.00Incl. of GSTXL6009 Step Up Module with Display
- Input Voltage: 3 ~ 32 V
- Output Voltage: 5 ~ 40V
- Transfer Efficiency: 94%
- Operating Temperature: -40°C to +85°C
- The booster works below 5V normally, but the display does not work
₹249.80₹280.84Incl. of GSTXL6009 Step Up Module with Display
₹249.80₹280.84Incl. of GSTCNC Shield V3 module
- Runs on 12-36VDC
- GRBL 0.9 compatible
- 4-Axis support
- Compact design
- 2 x End stops for each axis (6 in total)
₹106.00₹129.00Incl. of GSTCNC Shield V3 module
₹106.00₹129.00Incl. of GSTDRV8825 Stepper Driver Module
- Supply Voltage: 8.2 – 42 VDC
- Continuous motor drive output current: 2.5A (max)
- Logic voltage: 2.5V to 5V
- Micro step resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32
- Operating ambient temperature range: -40°C to 85°C
₹117.50₹230.00Incl. of GSTDRV8825 Stepper Driver Module
₹117.50₹230.00Incl. of GSTA4988 Stepper Motor Driver Module
- Load Supply Voltage (VBB): 8V-35V
- Output Current: ±2A(max)
- Logic Input Voltage: –0.3V to 5.5V
- Logic Supply Voltage: –0.3V to 5.5V
- Operating Ambient Temperature: –20ºC to 85ºC
₹68.00₹84.00Incl. of GSTA4988 Stepper Motor Driver Module
₹68.00₹84.00Incl. of GST