Arduino Uno R3 – SMD MCU – Without Cable
- Arduino Uno R3 SMD version
- Based on Atmel AVR Atmega328-AU MCU
- Clock: 16 Mhz
- Flash: 32 KB
- SRAM: 2 KB
- EEPROM: 1 KB
₹381.20₹399.00Incl. of GSTArduino Uno R3 – SMD MCU – Without Cable
₹381.20₹399.00Incl. of GSTHi Link HLK 5M12 – 12V 450mA – AC to DC Power Supply Module
- Output Voltage: 12 VDC
- Output Current: 450 mA
- Universal Input Voltage Range: 85 to 264 VAC
- CE and ROHS Certified
- Small Size
- Meets IP65 Standards
₹221.00₹283.20Incl. of GSTHi Link HLK 5M12 – 12V 450mA – AC to DC Power Supply Module
₹221.00₹283.20Incl. of GSTHC-05 Wireless Bluetooth Module without Base Plate
- Bluetooth protocol: Bluetooth Specification v2.0+EDR.
- UART interface with programmable baud rate
- With integrated antenna
- With edge connector
- Frequency: 2.4GHz ISM band.
- Modulation: GFSK(Gaussian Frequency Shift Keying).
- Emission power: =4dBm, Class 2.
- Sensitivity: =-84dBm at 0.1% BER.
₹264.00 Incl. of GSTHC-05 Wireless Bluetooth Module without Base Plate
₹264.00 Incl. of GSTVL53L1X LASER Ranging Module – Time of Flight Distance Sensor
- Emitter: 940 nm invisible laser (Class1)
- Up to 400 cm distance measurement
- Up to 50 Hz ranging frequency
- Typical full field-of-view (FoV): 27 °
- Fast and accurate long distance ranging
- Operating voltage: 2.8 – 3.3V
₹570.00₹604.00Incl. of GSTVL53L1X LASER Ranging Module – Time of Flight Distance Sensor
₹570.00₹604.00Incl. of GSTESP32 CAM Development Board – With OV2640 2 MP Camera
- Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
- Low-power dual-core 32-bit CPU for application processors
- Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
- Support OV2640 and OV7670 cameras with built-in flash
- Support TF card
₹476.00 Incl. of GSTESP32 CAM Development Board – With OV2640 2 MP Camera
₹476.00 Incl. of GSTSTM32F103C6T6 Compatible Module
- CPU frequency: 72 MHz
- Operating voltage: 2.0 to 3.6 V
- Operating temperature: -40 to +85 °C / -40 to +105 °C
- Debug mode– Serial wire debug (SWD) & JTAG interfaces
- Dedicated 32 kHz oscillator for RTC with calibration
₹117.00₹289.69Incl. of GSTSTM32F103C6T6 Compatible Module
₹117.00₹289.69Incl. of GST6.3mm Diameter Nozzle – 1 Feet Length
- Diameter: 6.3mm
- Length: 1 Feet
- 1 Qty = 1 Feet
₹5.90 Incl. of GST6.3mm Diameter Nozzle – 1 Feet Length
₹5.90 Incl. of GST
SIMCOM A7670C-LASS LTE 4G Module Cat-1
- Supply Voltage(V): 3.4~ 4.2
- Support SIM Card : 1.8V/3.0V
- DATA Transfer LTE(Mbps): 10(DL)/5(UL)
- Form Factor: LGA
- Power Consumption: 3.8mA
₹839.00 Incl. of GSTSIMCOM A7670C-LASS LTE 4G Module Cat-1
₹839.00 Incl. of GSTSerial RS232 to TTL converter module
- IC Chip: MAX3232ESE
- Operating Voltage: 3.3-5.5V
- It can be used to program STC MCU, NXP MCU, Renesas MCU, STM32 MCU, N+-2EC MCU
- Suitable for use with most microcontrollers
- Operates up to 250 kbit/s
₹46.80 Incl. of GSTSerial RS232 to TTL converter module
₹46.80 Incl. of GSTJLink V9 Debugger Emulator – ARM MCU Development Tool
- The main control chip adopts STM32F205, not lose firmware, and the hardware is upgraded to the latest version of V9.4
- Can provide 3.3V and 0.8A current for the development board (pin 2)
- Support standard JTAG interface and 2-wire SWD debugging interface. The speed can reach 20M (JTAG) / 15M (SWD) per second.
- Support debugging of all ARM chips, support MDK or IAR, and compile environment IDE supported by other standard JLink.
- Original firmware, full automatic upgrade The main control chip adopts STM32F205, without losing the firmware, and the hardware is upgraded to the latest version of V9.4
₹2,550.00 Incl. of GSTJLink V9 Debugger Emulator – ARM MCU Development Tool
₹2,550.00 Incl. of GSTHi Link HLK PM03 – For 3.3V 1A – AC to DC Power Supply Module
- Universal Input Voltage Range: 90 to 265 VAC
- Output Voltage: 3.3 Vdc
- Max Output Current: 1 A
- Meets UL, CE certification standards
- Designed to meet EMC and Safety Testing requirements
₹220.60₹271.40Incl. of GSTHi Link HLK PM03 – For 3.3V 1A – AC to DC Power Supply Module
₹220.60₹271.40Incl. of GST4 Channel 5V Relay Module – Optoisolated
- Optoisolated 4 Channel Relay Module
- Low Trigger Input Signals
- 3 Outputs Per Relay: NO, NC and C
- Max Current Rating: 10A @ 250 VAC
₹167.56₹206.50Incl. of GST4 Channel 5V Relay Module – Optoisolated
₹167.56₹206.50Incl. of GST
Get Lightning Fast dispatch on all orders without any extra charge. And avail GST credit on all your purchases.