No products in the cart.
ESP32-S3-WROOM-1 Wi-Fi + Bluetooth LE MCU – ESP32 S3 WROOM 1 N16R8
- Operating voltage/Power supply: 3.0 ~ 3.6 V
- On-board PCB antenna
- 40 MHz crystal oscillator
- Bluetooth LE: Bluetooth 5, Bluetooth mesh
- 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth® 5 (LE) module
- Up to 36 GPIOs, rich set of peripherals
₹377.00 Incl. of GSTESP32-S3-WROOM-1 Wi-Fi + Bluetooth LE MCU – ESP32 S3 WROOM 1 N16R8
₹377.00 Incl. of GSTESP32-DevKitC ESP32-WROOM-32UE Development board
- Processor: Xtensa dual-core 32-bit LX6, up to 240 MHz
- Flash Memory: 4 MB
- Wi-Fi Standard: 802.11b/g/n (2.4 GHz), up to 150 Mbps data rate
- Bluetooth: V4.2 BR/EDR and LE
- Operating Voltage: 5V
- Operating Temperature Range: -40°C to 85°C
₹510.00 Incl. of GSTESP32-DevKitC ESP32-WROOM-32UE Development board
₹510.00 Incl. of GSTNodeMCU ESP8266 CP2102 Wifi Development Board
- Based on ESP8266-12F/12E
- Easy to use wifi development board with Lua Scripting
- Open source firmware and development kit
- Input Voltage: 5V to 12V
- Built in USB to TTL Serial using CP2102
₹270.50 Incl. of GSTNodeMCU ESP8266 CP2102 Wifi Development Board
₹270.50 Incl. of GST4 Channel USB Dc Dc Buck Converter Fast Charger Module QC3.0 QC2.0
- Input Voltage: 6V to 32V DC
- Output voltage: default 5V, automatically adjust between 3-12V after triggering fast charge
- Output power: up to 24W (5V/3.4A, 9V/2.5A, 12V/2A, etc.)
- USB Ports: 4x USB Type-A
- Conversion efficiency: 90%-97%
- Supports QC3.0, QC2.0, SFCP, FCP, AFC, BC1.2, Apple, Samsung
₹374.50 Incl. of GST4 Channel USB Dc Dc Buck Converter Fast Charger Module QC3.0 QC2.0
₹374.50 Incl. of GSTIP6505 24W USB Fast Charging Module – QC2.0 QC3.0 Apple Samsung BC1.2 Support – Step Down Module
- Input Voltage Surge: Handles up to 48V surge
- Input Voltage Range: 6V to 32V
- Output Voltage Range: 3V to 12V; supports up to 24W output power
- Supported Fast Charging Protocol: FCP,AFC,SFCP,SCP
- Conversion Efficiency: Up to 97.5%
₹67.90 Incl. of GST2 Channel USB Dc Dc Buck Converter Fast Charger Module QC3.0 QC2.0
- Input Voltage: 6V to 32V DC
- Output voltage: Default 5V, automatically adjust between 3-12V after triggering fast charge
- Output power: up to 24W (5V/3.4A, 9V/2.5A, 12V/2A, etc.)
- USB Ports: 2 x USB Type-A
- Conversion efficiency: 90%-97%
- Supports QC2.0, QC3.0, AFC, SFCP, FCP, BC1.2, Apple, Samsung
₹204.90 Incl. of GST2 Channel USB Dc Dc Buck Converter Fast Charger Module QC3.0 QC2.0
₹204.90 Incl. of GSTMP2315 DC DC Adjustable Step Down Module – Adjustable and Fixed Output
- Supply Voltage (VIN): 4.5V to 24V
- Output Voltage (VOUT): Adjustable, 12V, 9V, 5V, 3.3V, 2.5V, 1.8V
- Operating Junction Temperature (TJ): -40°C to +125°C
- Enable PIN
- Load Current: Up to 3A
- Low Quiescent Current
- Switching Frequency: Fixed 500kHz
₹79.50 Incl. of GSTMP2315 DC DC Adjustable Step Down Module – Adjustable and Fixed Output
₹79.50 Incl. of GSTMP4560 DC DC 8-55V to 5V 2A Step Down Module – Fixed Output
- Input Voltage (VIN): 8V to 55V
- Output Voltage (VOUT): 5V
- Output Current (IOUT): Up to 2A
- Efficiency: Up to 95%
- Quiescent Current: 140μA (typical)
- Switching Frequency: Up to 2MHz
₹180.00 Incl. of GSTMP4560 DC DC 8-55V to 5V 2A Step Down Module – Fixed Output
₹180.00 Incl. of GSTCC1101 RF Transceiver Module – 868Mhz
- Support FSK, GFSK, ASK / OOK and MSK
- Programmable data rate: 1.2 to 500k Baud
- Vertical Pin header (1.27mm pitch)
- Low voltage input (1.9~3.6V)
- SPI interface
- Independent 64-byte RX and TX data FIFOsCC1101 Core, 433MHz Wireless function
₹265.00 Incl. of GSTCC1101 RF Transceiver Module – 868Mhz
₹265.00 Incl. of GSTYX850 Power Failure Automatic Switching Module – 5V-48V
- Input Voltage Range: 5V to 48V DC
- Switching Current: Up to 10A
- Power Consumption: Low power consumption during operation
- Primary-Secondary Switching Delay: < 10ms
- Operating Temperature Range: -40°C to 85°C
- Mounting: Screw hole mounting for easy installation
₹249.00 Incl. of GSTYX850 Power Failure Automatic Switching Module – 5V-48V
₹249.00 Incl. of GSTPN532 NFC RFID Read Write Module Kit V3
- Operating Voltage: 3.3V – 24V (TTL level for I2C/UART), 3.3V (TTL for SPI)
- Interface: I2C, SPI, High-Speed UART (HSU)
- Communication Distance: 5cm to 7cm (NFC and RFID)
- PCB Antenna: Built-in, providing 4cm to 6cm communication range
- Works as an NFC device or RFID reader/writer
₹268.00 Incl. of GSTPN532 NFC RFID Read Write Module Kit V3
₹268.00 Incl. of GSTAMS1117 3.3V Power Supply Module
- Model: AMS1117 3.3V Voltage Regulator Module
- Input Voltage Range: 4.5V – 12V DC
- Output Voltage: 3.3V DC
- Output Current: Up to 800mA
- Dropout Voltage: 1.1V @ 800mA load
- Operating Temperature: -40°C to 125°C
₹14.50 Incl. of GSTAMS1117 3.3V Power Supply Module
₹14.50 Incl. of GST
